REFINE YOUR SEARCH Showing 1 - 15 of 65 results
REFINE NOW
Order By
Brand
Clothing Size
Colour
Price Range
REFINE NOW
Show sidebar

2020 GAS GAS Red T-Shirt

Good quality plain red GAS GAS T-Shirt.

2020 GG/GAS GAS logos on left-hand breast, right arm and big GG/GASGAS logo on the back.

£15.00 inc. VAT, where applicable Select options

GAS GAS Team T-Shirt with TrialEnduroDirect logo

Good quality plain red GAS GAS T-Shirt

GG/GAS GAS logos on left-hand breast, right arm and big GG/GASGAS logo on the back.

www.trialendurodirect.com (TED) logo on the right breast.

£15.00 inc. VAT, where applicable Select options

Trick Bits GG TXT clutch case protector – FULL

FULL protector of clutch cover and waterpump for 2017 to 2019 TXT models

£25.00 inc. VAT, where applicable Add to basket

S3 Stars Cylinder Head GAS GAS EC250/300 2T ‘insert only’ 2018/2019

These S3 inserts for 2018/2019 EC250/300 are ALL lower compression than standard EC RACING heads. The EC GP heads are higher still!

The ‘standard’ (silver) one simply transforms any aggressive power into a fantastic smooth power delivery. Very highly recommended.

It uses the best alloys available, to obtain a better output & more traction. The advantage of these heads is that they can hold more water and have thicker walls which help with the cooling rate, thus improving slightly low revs power.

STARS HEAD kits eliminate the hot spots typically found on cast heads.

Forged in the best aluminum alloy to obtain a top quality component and high durability. Its new design has thicker walls and higher water flow to ensure a better cooling rate.

New design:
• Forging them eliminates the hot spots found on casted heads.

Different compression Inlet, what changes?
• Standard compression (STD): Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.
• High compression (A): Possibility to add another gear, better traction and very clean response.
• Very high compression ( AA y AAA): Especially for altitudes over 1500m , or MX engine preparation.
• Low compression: Incredible traction, smooth response, ideal for X-treme, TOP pilots use it. It’s a delight!

£57.99 inc. VAT, where applicable Select options

2019 GGUK MOTS Enduro Shirts

As used by Team GAS GAS UK

Manufactured in Elastomer fabric an elastic, light, resistant and breathable.

Vented fabric in the underarm and neck.

Anatomical arms.

Foam protection (4mm) in the shoulders.

Rib-knit cuffs for a perfect fit.

Sublimation printing, easy to wash and color resistance.

£40.00 £30.00 inc. VAT, where applicable Select options

MOTS X1 MX/Enduro Pants in RED

It will look great with any GG or red shirt.

Made in a Polyester 900D fabric and transpirable fabric.

Resistant to abrasion and comfortability.

Breathable fabric on hips and thighs.

Adjustable waist.

Breathable TPR thigh.

Elastic on the articulation areas for maximum comfort.

 

£120.00 £80.00 inc. VAT, where applicable Select options

2019 GGUK MOTS Enduro Pants

As used by Team GAS GAS UK;

Made in a Polyester 900D fabric and transpirable fabric.

Resistant to abrasion and comfortability.

Breathable fabric on hips and thighs.

Adjustable waist.

Breathable TPR thigh.

Elastic on the articulation areas for maximum comfort.

 

£120.00 £90.00 inc. VAT, where applicable Select options

2019 Team JSTGGUK MOTS Trials Zip Jacket

As used by 2019 TEAM JSTGGUK Trials Team;

Manufactured in 85% polyester and 15% elastomer.

Light, comfortable and elastic jacket.

Lycra cuffs.

£90.00 inc. VAT, where applicable Select options
£115.00 inc. VAT, where applicable Select options

2019 Team JSTGGUK MOTS Trials / Enduro Shirts

As used by 2019 TEAM JSTGGUK Trials Team

Manufactured in Elastomer fabric an elastic, light, resistant and breathable.

Vented fabric in the underarm and neck.

Anatomical arms.

Foam protection (4mm) in the shoulders and elbows.

Rib-knit cuffs for a perfect fit.

Sublimation printing, easy to wash and color resistance.

 

£40.00 inc. VAT, where applicable Select options

S3 Stars Cylinder Head GAS GAS TXT250/280/300 ‘inserts only’ – for OLD type Vertical and OLD type horizontal water hose outer Head.

These inserts (part number ST-GG-IN-???) are compatible with the old type vertical and old type horizontal water hose outer head. SEE PHOTOS.

If you want fairly flat power for beginners or for really slippery conditions then you would set the bike up with a “low” compression insert. If you want to keep the bike standard, order the “standard” insert. If you wanted a more aggressive power setup, or you are going high in altitude then you could experiment with a “high” or “very high” compression insert.

STAR HEAD Inserts: Forged in the best aluminum alloy to obtain a top quality component and high durability. Its new design has thicker walls and higher water flow to ensure a better cooling rate. New design:

• Forging them eliminates the hot spots found on casted heads. Specific design of the compression inlets, gives options to adapt engine setting to YOUR CHOICE, you will feel real difference between different compression options ( low comp. inlet available as accessory)Different compression Inlet, what changes?

• Standard compression (STD): Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.

•High compression (A): Possibility to add another gear, better traction and very clean response.

•Very high compression ( AA y AAA): Especially for altitudes over 1500m , or MX engine preparation.

• Low compression: Incredible traction, smooth response, ideal for X-treme, TOP pilots use it. It’s a delight!

£58.00 inc. VAT, where applicable Select options

S3 Stars Cylinder Head GAS GAS TXT250/280/300 ‘inserts only’ – for NEW type Horizontal Outer Head ST-1060

 

These inserts are ONLY compatible with the new type horizontal outer head (part number ST-1060-R).

SEE PHOTO of the new type horizontal head that only these inserts fit.

 

If you want fairly flat power for beginners or for really slippery conditions then you would set the bike up with a “low” compression insert. If you want to keep the bike standard, order the “standard” insert. If you wanted a more aggressive power setup, or you are going high in altitude then you could experiment with a “high” or “very high” compression insert.

STAR HEAD Inserts: Forged in the best aluminum alloy to obtain a top quality component and high durability. Its new design has thicker walls and higher water flow to ensure a better cooling rate.

New design:

• Forging them eliminates the hot spots found on casted heads.

Specific design of the compression inlets, gives options to adapt engine setting to YOUR CHOICE, you will feel real difference between different compression options ( low comp. inlet available as accessory) 

Different compression Inlet, what changes?

• Standard compression (STD): Higher torque and power at low revs. Even though it is similar to the original compression, you will notice the difference.

•High compression (A): Possibility to add another gear, better traction and very clean response.

•Very high compression ( AA y AAA): Especially for altitudes over 1500m , or MX engine preparation.

• Low compression: Incredible traction, smooth response, ideal for X-treme, TOP pilots use it. It’s a delight!

£58.00 inc. VAT, where applicable Select options

S3 Stars Cylinder Head GAS GAS TXT250/280/300 ‘Cover only – vertical old type – up to 2014 ST-GG-CO

S3 Stars Cylinder Head, Outer part only.

This Outer is the older type S3 Head with the vertical water hose outlet for GG TXT 250/280/300 models up to 2014 Part number S3-GG-CO

If you need an insert make sure you ask for the old type to suit vertical head outer. Part number ST-GG-IN

The various inserts are available separately on this website.
If you want fairly flat power for beginners or for really slippery conditions then you would set the bike up with a “low” compression insert. If you want to keep the bike standard, order the “standard” insert. If you wanted a more aggressive power setup, or you are going high in altitude then you could experiment with a “high” or “very high” compression insert.

£77.99 inc. VAT, where applicable Add to basket

S3 Stars Cylinder Head HUSKY TE250/300 2T ‘outer only’

S3 STARS HEAD CYLINDER COVERS

STAR HEAD cylinder covers: Forged in the best aluminum alloy to obtain a top quality component and high durability. Its new design has thicker walls and higher water flow to ensure a better cooling rate.

New design:
• Capable of cooling faster, thus low revs power increases.
• Forging them eliminates the hot spots found on casted heads.

New look:
• Its shape and color makes it beautiful.
• Noticeable at a distance and stunning at a close view.
( Special for S3 inlet)

£97.99 inc. VAT, where applicable Select options

S3 Stars Cylinder Head GAS GAS EC250/300 2T ‘outer only’

STAR HEAD cylinder covers: Forged in the best aluminum alloy to obtain a top quality component and high durability. Its new design has thicker walls and higher water flow to ensure a better cooling rate.

New design:
• Capable of cooling faster, thus low revs power increases.
• Forging them eliminates the hot spots found on casted heads.

New look:
• Its shape and color makes it beautiful.
• Noticeable at a distance and stunning at a close view.
( Special for S3 inlet)

 

£91.99 inc. VAT, where applicable Select options